Τετάρτη 10 Φεβρουαρίου 2010

DgiVecp

The DgiVecp service failed to start due to the following error: The system cannot find the file specified.

Each time the server (running Windows Small Business Server 2003) is
restarted, I see this error:

"One or more services failed to start."

In the System Event Log, I regularly see the following error:

"The DgiVecp service failed to start due to the following error: The
system cannot find the device specified."

This is Event ID 7000 and the source is Service Control Manager. On
doing a search for DgiVecp, I find it in the following three
locations:

C:\Windows\system32\drivers\dgivecp.sys
C:\Windows\Samsung\CLP-510\Data\dgivecp.sys
C:\Windows\Samsung\CLP-510\GDI\Data\dgivecp.sys

I have looked at Administrative Tools --> Services but the service in
question is not listed there at all which in itself is confusing. I
have looked in the registry in (HKEY_LOCAL_MACHINE\SYSTEM
\CURRENTCONTROLSET\SERVICES) and 'Start' is already set to 0x2 which I
believe is 'Automatic' start up.

So...it looks like it has to do with my Samsung printer (which is
elsewhere on the network and not directly connected) but what on earth
can I do to resolve this? I have no idea what's going on.

Any advice / suggestions much appreciated. I can provide more
information if you need it. If I'm posting in the wrong place, please
could someone point me in the right direction? Thanks.

doing a search for DgiVecp, I find it in the following three
locations:

C:\Windows\system32\drivers\dgivecp.sys
C:\Windows\Samsung\CLP-510\Data\dgivecp.sys
C:\Windows\Samsung\CLP-510\GDI\Data\dgivecp.sys

I have looked at Administrative Tools --> Services but the service in
question is not listed there at all which in itself is confusing. I
have looked in the registry in (HKEY_LOCAL_MACHINE\SYSTEM
\CURRENTCONTROLSET\SERVICES) and 'Start' is already set to 0x2 which I
believe is 'Automatic' start up.

So...it looks like it has to do with my Samsung printer (which is
elsewhere on the network and not directly connected) but what on earth
can I do to resolve this? I have no idea what's going on.

----Until now----
we know this is samsung problem
we know 2 means aytomatic start
so we can change it

(Shain Wray
Microsoft PSS Security Team
This posting is provided "AS IS" with no warranties and confers no rights.
Please reply to the newsgroup so that others may benefit. Thanks!)

posted the answer but did not explained what changing from 2 to 4 means
(micro-soft combinations)
----SOLVED----
1. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
2. Look for an entry listed as DgiVecp
3. If you find this, then change the Start data value to 4.
4. Reboot the system and see if the message is gone.

2 σχόλια:

  1. Further explanation: The DgiVECP driver is the Virtual ECP Parallel Port driver. I believe it's used for systems connecting to networked printers where there's a need to go through a parallel port. It allows the printer to connect to a "virtual" parallel port. I've never found any use for this on modern systems.

    Also, instead of directly editing the Registry, which can be dangerous, better to use the Service Control command "SC".

    Open a command console as Administrator and run:

    SC CONFIG dgivecp start= disable

    Note the space after "start=" is REQUIRED.

    ΑπάντησηΔιαγραφή
  2. Should be:
    SC CONFIG dgivecp start= disabled

    (you were missing a d in disabled)

    ΑπάντησηΔιαγραφή